How To Install Vinyl Plank Flooring As A Beginner

How To Install Vinyl Plank Flooring As A Beginner

Installing vinyl plank flooring is a popular DIY project for beginners because it’s easy to install and affordable. Vinyl plank flooring is available in interlocking planks installed over existing flooring, so you won’t have to remove your old flooring. In this article, we’ll look at how to install vinyl plank flooring as a beginner. See over here to get info about vinyl flooring suppliers in UAE.

Materials you’ll need:

Before installing vinyl plank flooring, you must gather the necessary materials. These include:

• Vinyl plank flooring

• Measuring tape

• Utility knife

• Straight edge

• Rubber mallet

• Tapping block

• Spacers

Preparing the subfloor:

The first step in installing vinyl plank flooring is preparing the subfloor. This means ensuring your subfloor is clean, flat, and dry. Sweep or vacuum the subfloor to remove any dust or debris. If your subfloor is uneven, use a leveling compound to even it out. If your subfloor is made of wood, ensure it’s dry and free of rot or damage.

Installing the first row:

To install the first row of vinyl plank flooring, you’ll need to measure the room’s length and cut the planks accordingly. Use a straight edge and a utility knife to make your cuts. Lay the first row of planks against the wall with spacers between the planks and the wall. The spacers will allow for the expansion and contraction of the flooring.

Installing the subsequent rows:

You’ll need to interlock the planks to install the subsequent rows of vinyl plank flooring. Hold the plank at a 45-degree angle and insert the tongue into the groove of the previous row. Use a rubber mallet and a tapping block to tap the planks into place. Stagger the seams between the planks to create a natural-looking pattern.

Finishing the installation:

To finish the installation of vinyl plank flooring, you’ll need to trim the planks to fit the edges of the room. Measure the length and width of the remaining space and cut the planks accordingly. Use a utility knife and a straight edge to make your cuts. Install the baseboard molding to cover the expansion gap between the flooring and the wall.

Installing vinyl plank flooring as a beginner is an easy and affordable DIY project. Prepare the subfloor, install the first row with spacers, interlock the subsequent rows, and trim the planks to fit the room’s edges. With these steps, you can install vinyl plank flooring in any homeroom and enjoy its durability and affordability for years.